Skip to main content

Parksville Garage Attic upgrade


In this small project, the homeowner wanted the garage attic upgraded. It appeared the previous owner had pushed the blown-in insulation to the sides so they could use the centre for storage.

The current owner wanted it brought up to standard. We removed the blown-in insulation from between the trusses, cleaned the baffles and re-installed as needed then installed 2 layers of R14 Roxul insulation at right angles to each other. This ensured complete coverage. The blown-in insulation was then replaced onto the Roxul.

removal of blown-in insulation
baffles installed properly
Click on an image to display a larger version,
then use slideshow controls at the top of the page.
Back to Top